Customer Reviews - T connector Wiring Harness
[55336]

$59.05 $53.68

---

by Jon Dugger | Date Added: Monday, May 19, 2014

Product Rating

Very simple to install, plugged right into my wiring harness - works great!

---

by Anthony L White | Date Added: Thursday, May 23, 2013

Product Rating

dilivery fast and quick excellent service would by from them again and again

---

by rocky den hartog | Date Added: Thursday, March 8, 2012

Product Rating

Just puchased a trailer hitch and wiring for my 06 Honda CRV.
Came earlier than expected. Easy installation, great looking and I didn't even get a scratch and I can't even wash my car without nicking a finger.
Highly recomend HitchSourse.
Rocky Den Hartog

---

by nicolas cooper | Date Added: Tuesday, September 13, 2011

Product Rating

The wiring harness arrived early, installed easily and worked perfectly. Very happy.

---

by Carol Dovel | Date Added: Wednesday, July 20, 2011

Product Rating

Easy install and great price. Customer service is the best.

---

by Christopher Langevin | Date Added: Wednesday, June 15, 2011

Product Rating

Order this for 2006 Honda Pilot. Took me a total of 5 min. to install. Remember to slit the hole plugs, run wire then put them around the wires, and replce them when you run the wire out of the lower frame and inside body. Directions were so easy to understand anyone could do it. tools needed were a razor blade, and scissors (to cut zip tie ends. Great product, great price, complete, and got here in two days (MA)

---

by Terry Kotschwar | Date Added: Thursday, June 9, 2011

Product Rating

This wiring harness was made specifically for my CRV and it had the correct plugs that were a snap to install. Perhaps the instructions could have included more pictures, but it was adequate for someone with five thumbs on each hand to install rather quickly. Everything works great.

---

by Verle Emanuelson | Date Added: Tuesday, September 7, 2010

Product Rating

I had installed the hitch myself, but saved the wiring harness for the professionals at the repair shop. It must have been easy, because they didn't charge me for the install and it took them less than 15 minutes........................or maybe it was the cookies my wife makes for the guys in the shop.

---

by Thomas Tomek | Date Added: Wednesday, February 24, 2010

Product Rating

Great product and easy to install. I couldn't find the connector from the instructions. I then Goggled harness install for Honda Pilot to view a uTube like video on installation. After that it was very simple. This Hitch Source wiring harness probably saved me $300-$500. from a dealership installation since Pep Boys won't do the job. I'd highly recommend this product.

---

by Joseph Gottlieb | Date Added: Wednesday, September 30, 2009

Product Rating

Easy to install, works great....Keep an eye on the plastic hole pugs from you vehicle. You will need them.

---

by Robert Holcomb | Date Added: Sunday, September 27, 2009

Product Rating

Wow plugs right in and lightning fast shipping . I now know where to go for our trailer hitch needs.

---

by Daniel Belker | Date Added: Sunday, September 6, 2009

Product Rating

Ordered wiring harness ,great service. After receiving it didn't fit and no one yet makes one for my 2010 honda pilot. Called to return it and customer service was great returned with no problems. Recommend this company to everyone. Thanks again.

---

by Timothy Miller | Date Added: Wednesday, August 19, 2009

Product Rating

Honda didn't make it easy. But I brought wiring harness under the threshold(cut a notch out) and into the cabin. Bought an extension which I hang right out through the door. If the extension ever gets damaged, I replace it and don't have to re-enter the quarter panel.

---

by John Brach | Date Added: Sunday, August 2, 2009

Product Rating

The instructions were excellent and led me right to the connector I needed to find. Honda was nice enough to leave an open connector to attach this to. The wiring harness has a built in circuit protector so that you don't blow your lighting fuse if the trailer lights short out. Nice feature.

---

by Mike Dillon | Date Added: Wednesday, July 29, 2009

Product Rating

Plugged right in and worked great, clean installation with good instructions!

---

by stephen dolan | Date Added: Thursday, July 16, 2009

Product Rating

Pretty easy to install. The clips that hold the body panels on seem a little looser when you re-attatch them. You might want to replace them as you go.

---

by Andy Elliott | Date Added: Wednesday, June 17, 2009

Product Rating

Good product and easy install, just make sure you read the other reviews. They really helped me out. All you have to do is pop the rear threshold out and the factory harness is there to the left behind the inner molding and the Curt Mfg plug goes right into it. Then there are 2 plugs you have to remove to feed the harness though, slit the plugs and reinstall them. I put a bracket on with a 7 round plug that I bought locally but later found it cheaper on Hitchsource (the bracket and 7 round to 4 flat). Be ready to install it because once you place your order the product will show up within a few days. Good luck and I would definitely recommend using this product.

---

by Jody Himebaugh | Date Added: Saturday, May 30, 2009

Product Rating

Perfect fit and it worked the minute I plugged the trailer in.

Two issues:
1. You might want to consider going to a dealership and have them show you how to remove the side panel to access the wiring harness plug.

The instructions are vague, at best, and you're likely to damage one or more of the plastic panel inserts that snap into the body holes.

2. The 4-pin flat plug at the end of the harness did not fit through the hole in the trunk. With some difficulty I had to enlarge the hole so the plug could be fed outside the vehicle to the hitch.

Overall, I was quite impressed with the quality of the harness; and, other than the hole problem, was happy that there were no major snags.

Note: In my opinion, this is not an easy project. Take your time, especially if you decide to remove the body panels yourself.

---

by Russell Miller | Date Added: Wednesday, August 13, 2008

Product Rating

Cannot review this, mine was backordered and I found one locally. No issue with a refund though, great to do business with HitchSource.

---

by Kurt Reichenbach | Date Added: Friday, July 25, 2008

Product Rating

I just purchased this and installed this harness with a Curt hitch on my '06 Pilot. The instructions are a bit vague but I had seen some pics of a similar installation on the Honda Pilot Forum and was able to figure it out from there. The two existing plastic frame plugs/grommets need to be cut to fit the wires through. Also, some care needs to be taken when locating a spot to fasten the adapter so it doesn't interfere with the plastic sill plate when you re-install it. I hope this doesn't maker the install sound difficult but it did require some thought and additional research above what the instructions offered. Overall I am happy with the product.

---

by Michael Toth | Date Added: Saturday, July 5, 2008

Product Rating

I ordered the harness for a 2004 Honda Pilot. They shipped it fast. It works great! It was easy to install. The only way it could be better is if the directions were more specific about routing the wires and the location to attach the module. So.... here's my help on those items:

For attaching the module, there is a spot on the rear sill, under the sill cover, towards the left side of the vehicle where it fits nicely. After you pop off the sill cover, there's a screw hole in the metal of the car near the wire connector. It seems that it was meant for the hole in the module. The plastic rear sill cover is made to fit around the module if it is mounted there. Check the underside of the sill cover and you'll see the spot that will easily fit over the module.

As for routing the wires, I found that Honda has some plastic covers about an inch in diameter that seal some holes that allow one to route the wires from inside the car through the frame to the outside of the vehicle. All that needs to be done is a few easy mods to the plastic covers. I just made a hole and a slit in the plastic cover, put the wires through it, and put the cover back in place on the vehicle. A little silicone sealant around the wires where they come through the cover and it's watertight again!

---

by Harold Nicholas | Date Added: Friday, June 13, 2008

Product Rating

This wiring harness is very easy to install, once you find the connector hidden under the cargo hatch of the Honda Pilot. No splicing. Very neat intall.

---

by Bryan Quiram | Date Added: Thursday, May 22, 2008

Product Rating

I purchased the connector for a 2001 Acura MDX, which is similar to the Honda Pilot. The t-connector has no instructions on where to locate the connection point to the vehicle electrical system for either an MDX or a Honda Pilot. I had copied Acura's instructions on how to install the t-connector from some website a couple years ago, so I was able to get it installed without a problem. It should come with two grommets for the wires, as they are fed through two large holes from inside the car into the frame, and then out of the frame. Need the grommets to keep water out of the interior of the car.

Connector itself fit perfectly and has plenty of wire to attach to the trailer. No complaints with the unit itself, just the lack of instructions for these vehicles.

---

by Yvon Bilodeau | Date Added: Tuesday, April 1, 2008

Product Rating

T- Connector for my crv 2006 honda came as expected, is now installed, and all is good.

---

by Joseph Murawski | Date Added: Tuesday, November 27, 2007

Product Rating

This is a nice piece that makes the hookup easy. The one issue I had was my 03 CRV has no removable speaker grille in the rear quarter and I had to rmove the whole rear quarter trim panel.

---

by Ken Cox | Date Added: Friday, October 19, 2007

Product Rating

T- Connector for my 2004 honda pilot arrived with the incorrect instruction sheet. I called Hitch Source, they were very helpful and they emailed me proper instructions. The wiring is easy to install.

---