Curt ManufacturingPart Number:
Class IReceiver Size:
1.25"Maximum Weight Carrying Capacity:
Gross Trailer Weight: 2000 lbs.
Tongue Weight: 200 lbs.This hitch is sold without a ball mount, pin, or clip. This configuration is ideal if you already have a ball mount, or if you intent to use the hitch for aftermarket accessories like bike racks or cargo carriers instead of for towing.This trailer hitch is designed to fit the following vehicles: 2003-2013 Toyota Corolla
Installation Time: 15 Minutes
--Fits Models: All
--No drilling required
|Curt Trailer Hitches Feature:|
*All trailer hitches come with grade 5 mounting hardware included.
- WeatherTite construction prevents rusting from inside out by sealing the main body of the hitch.
- Durable EverGloss Powder Coat Finish resists rust and corrosion.
- Open back end on receiver for easy cleaning.
- Precision robot welding for superior strength and fit.
- Attractive, seamless, one-piece collar reduces rust and provides improved strength.
Find Curt Trailer Hitches for another vehicle.
Manufacturer: Curt Manufacturing
I ordered this hitch for my Corolla, it was a good fit. I had read the insall instructions and after blowing out the mount holes and wire brushing them, I went and got a taper tap and then the bolts went right in.
The hitch arrived in two days and was in perfect condition. The only difficult part was cleaning the rust and dirt from the bolt holes in my four year old Corolla. The repeated insertion and removal approach worked reasonably well with penetrating oil to clean out the rust and I counted the number of turns of the bolt, increasing by 1/2 to one turn each time it was reinserted. After about four turns in, I resorted to screwing in my most worn 1/2 inch copper pipe cleaner to speed up the process. At 6-8 turns and after about 45 minutes the holes were clean enough to mount the hitch. That took only about ten minutes, because the hitch matched perfectly to the mounting holes. If you start with a new vehicle, that's probably how long it should... Read More
Just purchased a 2010 Corolla, neither Toyota, or other local hitch installers could locate a hitch to fit! You not only had it available from Curt Mtg., but it was at my door five days after ordering! Thanks!
The hitch for my Corolla fit perfectly and the coating on the hitch was excellent. The instructions for installation were very clear. It only took me about 10 minutes to install. I don't plan to two anything with the car, but needed the hitch to install a bike carrier for my wife and I when we go biking. All I needed was an adapter for the 1 1/4" receiver, since my bike carrier, which was bought to fit a full-size Dodge Van, was made to fit a 2" receiver. I didn't know if you carried any adapters like this for bike carriers. If you do, it might be nice to show that option with the Class I hitches. It's likely other folks use the hitches on sub-compact cars for bike carriers only and switch, like me, between the 1 1/4" and 2" receivers.... Read More
This hitch is much more heavy duty then others I've seen. Well built. All parts were included. Very easy to install.