My wife and I completed the installation last week. The instructions are good. The following information would help;
When removing the Fascia, define pulling out as standing at the wheel and pulling directly toward you. This takes 2 people(one on each side).
Add a note that this is a weldment, not a machined product and aligning the holes may require use of a pry bar to hold holes in position while bolts are inserted.
In addition to trimming the flange on the frame rail on the passenger side, some grinding can be be required to the flange area on the driver side frame rail. An angle grinder or similar equipment is required to facilitate this.
This product fits the following vehicles:
Click image below for detailed installation instructions: