List Price: $696.96
Our Price: $536.47
Free Shipping! | 
Click On Image to Enlarge
| | | |
Does your vehicle handle like the Queen Mary? Does it pitch and roll with every gust of wind or passing semi, list to port or starboard on the curves, or waddle over speed bumps, railroad tracks and driveways? Well, it shouldn't. As a matter of fact, motorhomes, SUVs, pickup trucks and vans can be made to handle just like what they are - motor vehicles - with two aftermarket upgrades.
Upgrading your shock absorbers will control up and down motion. But the best shocks in the world won't affect side to side sway by one iota.
The solution to sway is in the suspension. Adding a set of ROADMASTER Suspension Solutions anti-sway bars to your suspension system will have the same effect on sway as a good set of shocks has on up and down motion - there's an immediate improvement in stability and tracking, especially on the curves.
For many, this is an empowering experience. What was beyond their control, just yesterday, is suddenly within it - cornering with confidence, quicker maneuvering, and a remarkably level ride over uneven terrain - all without launching the dishes out of the cupboard. And even after eight or 10 hours at the wheel, they arrive fresh, instead of fatigued, which means they can start enjoying the Grand Canyon, the Grand Tetons, or the grandkids right away.
 
 | Product Specifications |  | | Manufacturer: Roadmaster
Model: Anti-Sway Bar
Part Number: 1109-150
This Anti-Sway Bar is designed to fit the following vehicles:
2008-2011 CHEVROLET/GMC G4500 EV Type 1
Installation Time: 1.5 Hours
Comments: 1 3/8" diameter rear bar
Notes: Will work with automatic tire chains.
Chassis built before June of 2007 will require an additional axle mounting bracket kit part # 590061-00.
No Drilling Required
2004-2011 CHEVROLET/GMC 2500/3500 Van/Pick-up
Installation Time: 1.5 Hours
Comments: 1 3/8" diameter rear bar
Notes: Chassis built before June of 2007 will require an additional axle mounting bracket kit part # 590061-00.
No Drilling Required
2004-2011 CHEVROLET/GMC 2500/3500 EV Type 1
Installation Time: 1.5 Hours
Comments: 1 3/8" diameter rear bar
Notes: Chassis built before June of 2007 will require an additional axle mounting bracket kit part # 590061-00.
No Drilling Required
1997-2011 CHEVROLET/GMC 2500/3500 EV Type 3
Installation Time: 1.5 Hours
Comments: 1 3/8" diameter rear bar
Notes: Chassis built before June of 2007 will require an additional axle mounting bracket kit part # 590061-00.
No Drilling Required
1977-2011 CHEVROLET/GMC 2500/3500 Class C
Installation Time: 1.5 Hours
Comments: 1 3/8" diameter rear bar
Notes: Chassis built before June of 2007 will require an additional axle mounting bracket kit part # 590061-00.
No Drilling Required
2007-2011 WORKHORSE 3500 Class C
Installation Time: 1.5 Hours
Comments: 1 3/8" diameter rear bar
Notes: Chassis built before June of 2007 will require an additional axle mounting bracket kit part # 590061-00.
No Drilling Required
2008-2011 CHEVROLET/GMC G4500 Class C
Installation Time: 1.5 Hours
Comments: 1 3/8" diameter rear bar
Notes: Chassis built before June of 2007 will require an additional axle mounting bracket kit part # 590061-00.
No Drilling Required
Installation Instructions
Not Your Vehicle? Search for other Roadmaster Anti-Sway Bars |
| |  | |  | |
| 
