This product fits the following vehicles:
2005-2019 NISSAN FrontierInstallation Time: 3 Hours
Notes:
--Baseplate tab width: 33 1/2"
--Baseplate tab height: 13 1/4"
--Recommended wiring:
Bulb and Socket Kit" or
LED Wiring Kit (Clear)" or
LED Wiring Kit (Red)"--Bumper fascia must be removed and replaced during installation.
--Requires some trimming of bumper (fascia, plastic, and/or grill).
--Requires some drilling (not major).
--Tow hooks must be removed and remain off the vehicle after installation.
--The weight of this vehicle is near the Class III, 5000 lb, rating limitations. Some models, depending on options, may well exceed this 5000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. As of 1999 the Aventa II is now rated at 10000 lbs and either the Aventa II or Alexus tow bar must be used for these applications. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.
2005 NISSAN Pathfinder LE/SE/XEInstallation Time: 3 Hours
Notes:
--Baseplate tab width: 33 1/2"
--Baseplate tab height: 12 1/2"
--Recommended wiring:
Bulb and Socket Kit" or
LED Wiring Kit (Clear)" or
LED Wiring Kit (Red)"--Bumper fascia must be removed and replaced during installation.
--Requires some trimming of bumper (fascia, plastic, and/or grill).
--Requires some drilling (not major).
--Tow hooks must be removed and remain off the vehicle after installation.
--The weight of this vehicle is near the Class III, 5000 lb, rating limitations. Some models, depending on options, may well exceed this 5000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. As of 1999 the Aventa II is now rated at 10000 lbs and either the Aventa II or Alexus tow bar must be used for these applications. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.
2008-2012 NISSAN PathfinderInstallation Time: 3 Hours
Notes:
--Baseplate tab width: 33 1/2"
--Baseplate tab height: 12 1/2"
--Recommended wiring:
Bulb and Socket Kit" or
LED Wiring Kit (Clear)" or
LED Wiring Kit (Red)"--Bumper fascia must be removed and replaced during installation.
--Requires some trimming of bumper (fascia, plastic, and/or grill).
--Requires some drilling (not major).
--Tow hooks must be removed and remain off the vehicle after installation.
--The weight of this vehicle is near the Class III, 5000 lb, rating limitations. Some models, depending on options, may well exceed this 5000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. As of 1999 the Aventa II is now rated at 10000 lbs and either the Aventa II or Alexus tow bar must be used for these applications. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.