| Displaying 1 to 6 (of 26 reviews) |
Result Pages: 1 |
|
 |
|
 |
The trailer hitch arrived quickly and was super easy to install on the Honda Pilot. There are a couple of rubber grommet covered holes that are available to easily snake the trailer harness from the "trunk area" to the underside of the vehicle. The whole install took about an hour - and that was with my 14 year old son "helping" me. :)
Rating: [5 of 5 Stars!] |
 |
|
|
 |
|
 |
Nice product. Easy to install. The only problem I ran into was the factory nuts which are welded on the unibody frame, broke loose. So I had to weld the drivers side on. But I would recommend this product to anyone wanting to save some $ and do it themselves.
Rating: [5 of 5 Stars!] |
 |
|
|
 |
|
 |
Installed very easily on my '08 Honda Pilot although you need two people because it is heavy. Use a little dish soap on the rubber muffler hangers to ease their removal. Then drop the muffler a little but use wire to hold it during the installation.
Rating: [5 of 5 Stars!] |
 |
|
|
 |
|
 |
This was the easiest hitch I have ever put on. Thanks to the Automaker for thinking about making it easy!
Rating: [5 of 5 Stars!] |
 |
|
|
 |
|
 |
The hitch was delivered quickly and is as shown in their advertisement.
Only complaint is that it had a few scratches because it had broken through the shipping box on one end.
Rating: [4 of 5 Stars!] |
 |
|
|
 |
|
 |
Very impressed with the quality, construction, and what looks to be a very durable finish of this hitch!. It fit exactly as it should.
The only problem i had was with the Honda Pilot - the threads in the bolt holes on the side that didn't have the tow loop were rusted up (the joys of living in the snow/salt belt). I found that using the a bolt from the tow loop, coated with some oil, and using a breaker bar, i could re-cut the threads. Tighten a little and then back it out a little, and keep going until the threads are cut in. Then you can use the bolts supplied by Curt. I couldn't start the bolts supplied from Curt, but the ones from the tow loop work well for this and it kept the bolts from Curt in perfect shape. Be careful -- it is possible to break the weld that holds the nut inside the frame.... so don't be a gorilla if you have to do this.
Rating: [5 of 5 Stars!] |
 |
|
|
 |
| Displaying 1 to 6 (of 26 reviews) |
Result Pages: 1 |
|
 |
|